Chengdu core synthesis industry solutions
background analysis
MACH3 system is a control system for CNC machine tools. There are a large number of users in the market. Generally, the handwheels equipped with this system are basically wired handwheels, and there are many problems in use. When used in the workshop, the cable is not long enough, which is very inconvenient to use. There are many equipment wires in the workshop, which are easy to twist together, which is troublesome and difficult to organize. The wires are also prone to damage and control abnormalities. The line is easy to be contaminated with oil, etc., and it is easy to contaminate the staff and other equipment during use. The line is easy to damage and cause problems with the handwheel.
demand analysis
1. There is no cable in the controller, no need to worry about twisting the wires together and getting oily.
2. The control distance must be long enough to remotely control the machine tool
3. The control signal should be stable.
Design
The wireless remote control handwheel produced by Chengdu Xinhesheng Technology Wire Co., Ltd. can solve this problem.
Use a wireless remote control instead of a wired one.
The handheld terminal and the receiver are connected by wireless transmission technology. No cables are connected.
The display screen is connected to the system to display coordinates in real time.
Attached drawing
Program features
Feature 1: The wireless transmission distance is up to 40 meters without barriers. The distance is far enough.
Feature 2: Using frequency hopping technology, strong anti-interference ability, and the remote control can work stably.
Feature 3: Low power consumption, 2 AA batteries can be used continuously for at least 1 month.
Products Recommended
Type Model Features
MACH3 remote control WHB04B Using wireless communication technology to solve many inconveniences of wired remote control
